Poda Portable Hand Held Fiber Laser Welding Machine is a kind of portable operation, equipment,can flexible used in various work environment,mainly aim at display rack,kitchen ware,crate,water tank,hardware decorative lighting,door window frame,kitchen and bath,sanitary ware,the billboard,advertising word this kind of laser welding.
Technical parameters:
Features:
1.save energy by about 80%. Compared with arc welding, the cost of processes can be reduced by about 30%.
2.extremely low. The machine is featured by small deformation after welding, smooth and beautiful welding surface, and less welding subsequent processing.
3.reduce the huge labor cost in polishing and smoothing procedures.
4.With portable design, the machine can be used flexibly in the limited range.
5.This machine can weld parts of different types, large parts and the special shaped parts unsuitable with fixture tools.
6.Programmed with laser safety protection，the machine can ensure the safety of operators during the processing.
7.Easy to learn and operate, limited technical requirement for operator, and remarkable saving of labor cost.
8.The welding joints are full and smooth, and the welding strength is close to the base material. Only dot or surface treatment it is required after welding.
9.High depth/width ratio of the welding spot, narrow welding slit, small heat-affected area, small deformation, fast welding speed.
Advantages:
1.Fast welding speed, 2~10 times faster than traditional welding;
2.Easy operating need no training;
3.Welding seam beautiful smooth and beautiful, don’t need polish, save your time;
4.No deformation or welding scar, firm welding of the work piece;
5.Laser welding has less consumables and long service life;
6.Safer, more environmentally friendly.
Use example:
1. Industry
Mold repair, automotive, motorcycle, aerospace, aviation, computer, medical device and 3C consumer product industries.
2. Precision and quality
2.1. Repair slots, pockets, radius contours and angles;
2.2. Repair polished, textured and engraved surfaces;
2.3. Repair thin walls with little or no warping;
2.4. Repair parting line edges and heat sensitive areas.
2.5 Open systems for welding of the largest and smallest work pieces, no limit.
3. Material
Die mould and tooling, plastic injection mold, complex electronic components, high-precision industrial assemblies, pressure-sensitive hermetic laser sealing, alloys include tool steel, stainless steel, aluminum, copper, titanium and powdered metals.
客服1